IEI Integration WAFER-LX v1.22 - Manual (Page 107)

WAFER-LX Motherboard
Page 89
Î Gate A20 Option [Fast]
Use the Gate A20 Option option to set if the keyboard controller or the chipset controls
the Gate A20 switching.
Î
Normal The keyboard controller does the switching.
Î
Fast D EFAULT The chipset does the switching.
Î Typematic Rate Setting [Disabled]
Use the Typematic Rate Setting configuration option to specify if only one character is
allowed to appear on the screen if a key is continuously held down. When this option is
enabled, the BIOS reports as before, but it then waits a moment, and, if the key is still held
down, it begins to report that the key has been pressed repeatedly. This feature
accelerates cursor movement with the arrow keys.
Î
Disabled D EFAULT Disables the typematic rate.
Î
Enabled Enables the typematic rate.
Î Typematic Rate (Chars/sec) [6]
The Typematic Rate option can only be configured if the Typematic Rate Setting is
enabled. Use the Typematic Rate option to specify the rate keys are accelerated.
Î
6 D EFAULT 6 characters per second
Î
8 8 characters per second
Î
10 10 characters per second
Î
12 12 characters per second
Î
15 15 characters per second
Î
20 20 characters per second
Î
24 24 characters per second
Î
30 30 characters per second