IEI Integration LVDS-VGA-R10 - Manual (Page 6)

Chapter 2. Installation
This chapter describes how to install the PM-1004-R20.
2.1 Hardware Installation
To install the PC/104 modules, please follow the instructions
below.
Note: Please ground yourself to remove any static charges
before touching your PM-1004-R20. You can do it by using a
grounded wrist strap at all times or by frequently
touching any conducting materials that is connected to the ground.
1. Turn the power off
2. Plug the PC/104 module into the connectors on the CPU
card.
3. Secure the PC/104 module with the four mounting
4. Adjust the required jumper settings
5. Attach the cables
6. Turn the power back on
6