IEI Integration AFL-19i-HM55 v1.01 User Manual
Afl-hm55 series, User manual, Model
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- 1 Introduction
- 2 Unpacking
- 3 Installation
- 3.1 Anti-static Precautions
- 3.2 Installation Precautions
- 3.3 Installation and Configuration Steps
- 3.4 Removing the HDD Cover
- 3.5 Installing a SATA DOM Card
- 3.6 Installing an HDD
- 3.7 Removing the Rear Panel Cover
- 3.8 Removing the Internal Aluminum Cover
- 3.9 Jumper Settings
- 3.9.1 Access the Jumpers
- 3.9.2 Preconfigured Jumpers
- 3.9.3 Clear CMOS Jumper
- 3.9.4 COM1 Pin 9 Setting
- 3.9.5 COM3 TX Function Select Jumper
- 3.9.6 COM3 RS-232/422/485 Jumper
- 3.9.7 COM3 RS Function Select Jumper
- 3.9.8 ME Debug Mode Jumper
- 3.9.9 iTPM Setting Jumper
- 3.9.10 ME RTC Select Jumper
- 3.9.11 SPI Setting Jumper
- 3.10 Mounting the System
- 3.11 Bottom Panel Connectors
- 3.12 AT/ATX Mode Selection
- 4 System Maintenance
- 5 BIOS Setup
- 6 Software Drivers
- A Safety Precautions
- B BIOS Configuration Options
- C Watchdog Timer
- D Hazardous Materials Disclosure