IEI Integration LCD-KIT Series v2.02 - Manual (Page 52)

LCD-KIT
Page 42
5.2.3 Packing List
All the monitors in the LCD-KIT series are shipped with the following components:
ƒ 1 x LCD-KIT series LCD monitor.
ƒ 1 x AC Power cable
ƒ 1 x VGA Cable
ƒ 1 x 50W AC Power Adapter (LCD-KIT190G / 170 / 150 / 121)
ƒ 1 x 35W AC Power Adapter (LCD-KIT104GH / 84 / 65)
ƒ 5 x Replacement Round Head Screw
ƒ 5 x Replacement Flat Head Screw
ƒ 5 x Replacement Wire Strain Band
ƒ 1 x User Manual on CDROM
If any of these items are missing or damaged, contact the distributor or sales
representative immediately.
5.3 Pre-installation Preparation
5.3.1 Tools
Before installing the LCD-KIT series LCD monitor, make sure the following tools are on
hand:
ƒ Philips (crosshead) screwdriver: All the retention screws on the system are
Philips screws.
ƒ Soft working mat: When the LCD-KIT series LCD monitor is installed, the
screen is placed on the working surface. It is therefore important to rest the
MPC industrial workstation on a soft mat that cannot damage the LCD screen
on the front of the LCD-KIT series LCD monitor.