Figure 4-13: monitor support screws – IEI Integration TDM_Series v2.01 User Manual
Page 56
Advertising
TDM Series Monitor
Page 42
Figure 4-13: Monitor Support Screws
Step 7:
Align the mounting screws on the monitor rear panel with the mounting holes on
the bracket.
Step 8:
Carefully insert the screws through the holes and gently pull the monitor
downwards until the monitor rests securely in the slotted holes (Figure 4-14).
Ensure that all four of the mounting screws fit snuggly into their respective
slotted holes.
Advertising