15 av-5300 on-board jumpers, Figure 4-36: jumpers, Figure 4-37: jumper locations – IEI Integration DM_Series v1.14 User Manual
Page 119
Advertising
DM Series Industrial Monitor
Page
119
4.4.15 AV-5300 On-board Jumpers
NOTE:
A jumper is a metal bridge used to close an
electrical circuit. It consists of two or three metal
pins and a small metal clip (often protected by a
plastic cover) that slides over the pins to
connect them. To CLOSE/SHORT a jumper
means connecting the pins of the jumper with
the plastic clip and to OPEN a jumper means
removing the plastic clip from a jumper.
Figure 4-36: Jumpers
The AV-5300 has two on-board jumpers (Table 4-32).
Figure 4-37: Jumper Locations
Advertising