2 driver installation, River, Nstallation – IEI Integration HDC-502E_SDK_Windows User Manual
Page 8
Advertising
HDC-502E SDK (Windows)
Page 8
NOTE:
If you cannot open the setup file in the 64-bit Windows 7 operating
system, please do the following:
Run a Command Prompt as an administrator. Key in the setup file
directory, and then launch the setup file from there.
1.2 Driver Installation
To install the HDC-502E driver, please follow the steps below: If the HDC-502E driver is
already installed, please refer to Section 1.2.2 to uninstall the driver first.
NOTE:
If the User Access Control dialog box appears during installation,
click Yes to continue.
Step 1:
Make sure to log in the system as the administrator.
Step 2:
Insert the driver CD.
Advertising