IEI Integration IVCME-C604 - Manual (Page 32)

IVCE-C608/IVCE-C604/IVCME-C604 Capture Card
Page 4
ƒ Green: self-defined
ƒ Red: self-defined
4.1.1.4 IVCE-C608 Reset Input Connector (CN4)
Use the reset input connector (CN4) to connect to the reset button of the system chassis
to enable the multiple card cascade reset function. Pinouts for the connector are shown in
Table 4-2.
Pin No. Signal
1 Reset input
2 GND
Table 4-2: IVCE-C608 Reset Input Connector Pinouts
4.1.1.5 IVCE-C608 Reset Output Connector (CN5)
Use the reset output connector (CN5) to connect to the reset connector on the
motherboard to enable the multiple card cascade reset function. Pinouts for the connector
are shown in Table 4-3.
Pin No. Signal
1 Reset output
2 GND
Table 4-3: IVCE-C608 Reset Output Connector Pinouts
4.1.1.6 IVCE-C608 Video/Audio Input/Output Connector (J1)
Compatible cameras connect to the IVCE-C608 through the DB-26 female connector (via
the D-SUB to BNC and RCA cable). Pinouts for the connector are shown in Table 4-4.
Pin No. Signal Pin No. Signal
1 Video In CH1 2 Video In CH2
3 Video In CH3 4 Video In CH4
5 Video In CH5 6 Video In CH6
7 Video In CH7 8 Video In CH8
9 Video Output 1 10 NC