IEI Integration HDC-3x-Series - Manual (Page 28)

HDC-3x Series Video Capture Card
Page 20
Figure 2-4: HDC-304E HDMI Output Kit Connector Location
2.5 HDMI Devices Installation
Various HDMI devices can be connected to the HDC-3x Series. Video input and video
output are all supported. Follow the steps below to connect the HDMI devices to the
HDC-3x Series.
Step 1: Insert the HDMI connector from the cable into the HDMI input connector on the
HDC-3x Series. Make sure the connection is secure.
Step 2: Insert the HDMI connector of the other end of the cable into the HDMI connector
on the HDMI device. Make sure the connection is secure.
Step 3: This step is only required for the HDC-302E and HDC-304E .Repeat the steps
above until all HDMI devices are connected.
Step 4: Use another HDMI cable to connect the HDMI connector of the HDMI display
device to the HDMI output connector on the board or on the HDMI output kit
(HDC-304E). Step 0: