1 introduction, 2 monitoring dc power and smart battery, 1 using the application – IEI Integration PM-P006UPS User Manual
Page 34
PM-P006UPS DC/DC Converter Module
Page 26
5.1 Introduction
The IEI IDDUPS Battery Status Monitor application detects the information of the smart
battery and monitors the battery status. It is recommended to execute this IDDUPS
application in Windows XP SP2 environment.
5.2 Monitoring DC Power and Smart Battery
5.2.1 Using the Application
Follow the steps below to start the IDDUPS Battery application.
Step 1:
Use the RS-232 cable to connect the JP2 connector on the PM-P006UPS to the
serial port of the SBC. Please refer to Section
173H173H181H
4.2.5
for the location of the JP2
connector.
Step 2:
Insert the application CD that comes with PM-P006UPS.
Step 3:
Double click the IDDUPS.exe icon (
174H174H182H
Figure 5-1
).
Figure 5-1: IDDUPS Battery Status Monitor Application
Step 4:
Click the SETTING tab when the IDDUPS Battery application is loaded
(
183H
Figure 5-2
).