Lincoln Electric IM10071 MAGNUM PRO THRU THE ARM ROBOTIC TORCH - Manual (Page 17)

B-6 INSTALLATION
MAGNUM® PRO THRU THE ARM ROBOTIC TORCH
B-6
CONNECTING GOOSENECK AND CON-
SUMABLES
(See Figure B.10)
Slide Jump Liner into desired gooseneck assembly
from gooseneck rear. Remove plug cover from nose
cone. Loosen set screw. Insert gooseneck into nose
cone (spot-face facing up) and secure with set screw.
Replace plug cover. Trim jump liner to 5/8" (16.0 mm)
stickout from end of gooseneck. Attach desired
Magnum Pro comsumables to gooseneck.
SET SCREW SET SCREW
PLUG COVER PLUG COVER
JUMP LINER JUMP LINER
SPOT FACE SPOT FACE
ON GOOSENECK
ON GOOSENECK
GUN TUBE (GOOSENECK) GUN TUBE (GOOSENECK)
GAS DIFFUSER GAS DIFFUSER
TIP TIP
GAS NOZZLE GAS NOZZLE
INSULATOR INSULATOR
LINER TRIM LINER TRIM
LENGTH LENGTH
5/8" (16.0 mm) 5/8" (16.0 mm)
FIGURE B.10