Lincoln Electric IM10023 MAXsa 10 CONTROLLER - Manual (Page 17)

B-2 OPERATION B-2
MAXsa™ 10 CONTROLLER
PRODUCT DESCRIPTION
GENERAL PHySICAL DESCRIPTION
• The MAXsa™ 10 CONTROLLER is a user interface
and a feeder controller. The control is used to set
all welding parameters and control any travel mech-
anisms. High-speed digital cables connect the con-
trol, wire drive, and the Power Wave power source
together.
• The MAXsa™ 10 CONTROLLER is a self-con-
tained control box designed to control the entire
weld arc at one location.
• The user interface utilizes alphanumeric displays
for advanced text messaging providing the end
user with an intuitive interface allowing for easy set
up and real-time control of all welding parameters.
• An eight button memory section has been included
which provides easy storage and recall of stored
welding parameters.
• The user interface can be removed from the control
box and connected as a Pendant for remote control
near the arc.
GENERAL FUNCTIONAL DESCRIPTION
• The MAXsa™ 10 CONTROLLER is one of the most
versatile user interfaces ever created. Easy to use
features make it a snap to adjust the arc for specific
preferences.
• The user interface brightly displays essential weld-
ing information. Use it to quickly adjust weld set-
tings, arc starting parameters, arc end parameters
and set-up information.
• The memories allow for up to eight weld schedules
to be stored and quickly recalled. The user inter-
face allows for multiple levels of limits and lockouts.
• Digital communications to the power source provide
the most accurate and reliable operation possible.
• When the MAXsa™ 10 CONTROLLER is coupled
to the Power Wave ® AC/DC 1000 SD welding
power source, the result is a welding system with
the best arc performance on the market.
RECOMMENDED PROCESSES AND
EQUIPMENT
• The MAXsa™ 10 CONTROLLER is best suited for
submerged arc welding only with the Power Wave ®
AC/DC 1000 SD, the MAXsa™ 22 or the MAXsa™
29 Feed Heads.
• SAW
COMMON BASIC EQUIPMENT PACKAGES
Basic Package
• K2803-1 Power Wave ® AC/DC 1000 SD
• K2370-2 MAXsa™ 22 Wire Drive
• K2814-1 MAXsa™ 10 CONTROLLER / User
Interface
• K2683-xx Control Cable (5 pin – 5 pin) - power
source to MAXsa™ 10.
• K1785-xx Control Cable (14 pin – 14 pin) -
MAXsa™ 10 to Wire Drive.
Optional kits
• K2312-2 MAXsa™ 29 Wire Drive (for fixture
builders).
• K2311-1 Motor Conversion Kit (to convert exist-
ing NA-3/NA-4/NA-5 wire feeder gear
boxes).
WIRE FEEDER
FLUX HOPPER
CONNECTOR
TRAVEL
CARRIAGE
CONNECTOR
GRAPHIC SyMBOLS THAT APPEAR ON
THIS MACHINE OR IN THIS MANUAL
CONTROLLER
ARCLINK INPUT
CONNECTOR
PENDENT
ARCLINK
CONNECTOR