Panther™ push pull gun accessories/maintenance, Accessories, Maintenance – Lincoln Electric IM10033 PANTHER K2874-1, K2874-2, K2874-3, K2875-2 User Manual

Page 15: Warning

Advertising
background image

PANTHER™ Push Pull Gun ACCESSORIES/MAINTENANCE

8

The following accessories are available for the Panther™ push-pull
gun.

.035-3/64" Aluminum Drive Roll Kit

Features two grooves for feeding aluminum wire. The smaller
groove feeds .035 wire. The larger groove feeds 3/64th wire.
Order KP2876-1

1/16" Aluminum Drive Roll Kit

Features two grooves, each capable of feeding 1/16"
Aluminum wire
Order KP2876-2

Knurled Drive Roll Kit

For feeding steel wires or larger 5356 Aluminum wires
Order KP2911-1

Barrel Liner (45°, 60° Barrels)

Liner for feeding up to1/16” wire.
Order KP2879-1

Barrel Liner (180° Straight Barrel)

Liner for feeding up to1/16” wire.
Order KP2879-2

Gun Barrel

60 degree air-cooled gun barrel

Order KP2877-60

45 degree air-cooled gun barrel

Order KP2877-45

180 degree air-cooled gun barrel

Order KP2877-180

60 degree water-cooled gun barrel

Order KP2878-60

Cable Assemblies

15 foot Air-Cooled Cable Assembly - Panther

Order KP2883-1

25 foot Air-Cooled Cable Assembly - Panther

Order KP2883-2

50 foot Air-Cooled Cable Assembly - Panther

Order KP2883-3

25 foot Water-Cooled Cable Assembly - Panther Order KP2884-2

Wire Conduits for Aluminum Wire

15 foot .035"-1/16" Wire Diameter

Order KP2881-15

25 foot .035"-1/16" Wire Diameter

Order KP2881-25

50 foot .035"-1/16" Wire Diameter

Order KP2881-50

Wire Conduits for Steel Wire

15 foot .035"-1/16" Wire Diameter

Order KP2912-15

25 foot .035"-1/16" Wire Diameter

Order KP2912-25

50 foot .035"-1/16" Wire Diameter

Order KP2912-50

Gas Diffuser

Diffuser designed to accept thread on gas nozzles
Order KP2746-1

Gun Tube Insulator

For insulation of gas nozzle

Order KP2773-2

Gas Nozzle

.50 Thread on Nozzle (Tip Recessed)

Order KP2742-1-50R

.62 Thread on Nozzle (Tip Recessed)

Order KP2742-1-62R

Contact Tips

.035

Order KP2744-035A

3/64"

Order KP2744-364A

3/64" (5356)

1.

Order KP2744-364A5356

1/16”

Order KP2744-116A

Air-Cooled to Water Cooled Retrofit 25'

Cable Assembly 25' Water Cooled

Order KP2884-2

Gun Barrel

Order KP2878-60

ACCESSORIES

(consult Lincoln Sales Bulletin E12.16)

1.

For use on lower amperage applications with 5356 wire. Features a smaller

tip inner diameter to reduce arc flaring.

MAINTENANCE

Safety Precautions

WARNING

• Do not operate with covers

removed.

• Disconnect input power from

welder before installing gun.

• Do not touch electrically hot

part.

• Only qualified persons should

install, use or service this
machine.

ELECTRIC SHOCK
can kill.

When finished welding, be sure to turn power source off and close
valve on gas cylinder.

• Working with flying or falling objects can cause serious eye

injuries.

• Protective eyeware such as safety specticals with side

shields or goggles must be worn at all times.

FLYING FRAGMENTS
can cause eye injury.

Routine Maintenance

Periodically blow out or vacum any metal wire shavings from Drive
Roll area.

Inspect and replace any worn wire on inlet guide or barrel liner.

NOTE: Oil and spray cleaners can contaminate electrode wire and
cause bad welds. They could also make wire drive rollers slip. Be
careful when using any of these liquids on push-pull gun.

Carefully clean gun with a cleaner that is safe for plastic. Apply
cleaner to rag and wipe gun. Do NOT spray cleaner on gun. Keep
cable dean. Oil, grease gasoline, paint, and solvents degrade cable
insulation.

Routine maintenance for consumable spare parts will depend on Duty Cycle and
particular application.

WARNING

WARNING

ELECTRIC SHOCK
can kill.

FLYING FRAGMENTS
can cause eye injury.

Advertising