Lincoln Electric IM10046 VRTEX 360 - Manual (Page 42)

B-25 OPERATION B-25
VRTEX ® 360
Tolerances Pattern and Aim Screen
Overview
This screen allows the user to change the type of pat-
tern being used (stringer, box weave, straight weave,
whip, triangle weave) and the position of the root of
the weld. The X and Y values change the location of
where the weld bead should be placed. This affects
the position parameter on the LASER screen. The +/-
determines how far off from the ideal position the stu-
dent can place the electrode before it results in a mis-
placed weld.
Tolerances Welding Technique
Parameters Screen
Overview
This screen allows the modification of:
• CTWD/Arc Length
• Work Angle
• Travel Angle
TOLERANCES WELDING
TECHNIQUE PARAMETERS
PATTERN & AIM SCREEN
Z
Y
X
X
X
Z
TEE PIPE GROOVE
Note: The travel angle for drag welding techniques
should always be less than 90 degrees. The
travel angle for pushing technique should
always be greater than 90 degrees.
COORDINATE CHART FOR WELD PLACEMENT (POSITION)