Audiovox 5 CD MINI HI-FI SYSTEM - Manual (Page 18)

- E18 -
Preventing accidental erasure
1. Cassette tapes have two erase-protection tabs - one for
each side. To protect a recording from being accidentally
recorded over or erased, use a screwdriver to remove
one or both of the cassette tape's erase-protection tabs.
3. Set the MODE selector according
to the desired dubbing speed:
NORMAL or HIGH.
2. Insert the recorded tape into Deck B
and the blank tape into Deck A.
1. Press the FUNCTION button to
TAPE.
Use only normal (type I ) tapes for recording and playback.
4. Press the PAUSE button. 5. Press the RECORD button which
also engages the PLAY button.
6. Press the PLAY button.
TO STOP DUBBING
Press the STOP/EJECT buttons of Deck A and Deck B.
NOTE: Do not change the dubbing speed when dubbing
is in progress.
Use only normal (type I ) tapes for recording.
RECORDING FROM THE BUILT-IN TUNER
2. Insert a tape into the cassette compartment.
RECORDING ----
DECK A ONLY
3. Press the RECORD button
which also engages the
PLAY button.
DUBBING ----
FROM DECK B TO DECK A
TAPE CARE TIPS
2. If you want to record on a tape side after you have
removed the erase protection
tab, place a piece of strong plas-
tic tape over that side's erase-
protection hole.
Notes:
1) Be sure you cover only the hole
originally covered by the
erase-protection tab.
2) Removing the erase-protection tabs does not prevent
a bulk eraser from erasing a cassette tape.
• If whistle is heard (beat) it may be reduced by switching the "Beat Cut" to the other position.
1. Press the FUNCTION button
to TUNER and tune into a de-
sired station. (see page E10)
DECK B DECK A
DECK A DECK B
Tape to be recorded Tape to be played
FM STEREO FM MONO
DUBBING
BEAT CUT
DECK A
DECK A
DECK A
This side
you want
to record