Lincoln Electric IMT10097 POWER MIG 216 - Manual (Page 13)

COIL CLAW™ INSTALLATION
The Coil Claw™ and mounting screws are provided
as an optional accessory for the POWER MIG® 216.
This user-install accessory provides cable manage-
ment for the machine.
Turn the welder power switch OFF
before installing Coil Claw™.
------------------------------------------------------------------------
1. Unwrap Coil Claw™ from its protective paper and
remove the bag of mounting screws from the back
of the Coil Claw™.
2. Mount the Coil Claw™ using the provided mount-
ing screws to the left side of the machine, when
viewed from the front. Make sure the Coil Claw™ is
firmly mounted. (See Figure A.3)
FIGURE A.3
A-5 A-5 INSTALLATION
WARNING
POWER MIG® 216
MOUNTING
SCREWS
COIL CLAW™
OPERA
T
ORʼS MANUAL