Otter Outdoors Pro XT 1200 Resort - Manual (Page 5)

Page 5
8. Assemble Front Main Frame Bar: Insert the outer main frame bar (Item 12) into the middle main frame bar
(Item 14). Fasten with self-tapping screw (Item 17), plastic protector (Item 23), and star washer (Item 24). Slide
the sleeve (Item 16) over the main frame extension bar (Item 10). (Line up holes with button lock, press lock
in as you slide over the bar). Insert the black plug (Item 18) into the main frame extension bar (Item 10). Insert
outer main frame bar (Item 12) into sleeve (Item 16). Cover end of main frame extension bar (Item 10) with black
end cap (Item 19). Ref. Diagram 5.
Diagram 5
9. Attach Front main frame assembly (Assembled in Step 8) onto frame brackets (Item 3 and 4). Secure with 1/4
nylon hex lock nut (Item 21). Ref. Diagram 6
4
3
3
Front Main Frame Assembly
Diagram 6
21
18
12
16
Button lock
should face
inward
10
19
12
10
14
23
24
23
24
17
23
24
17
Important: Do
not overtighten to
prevent stripping
of threads.
17
Note: Use a light oil
such as WD-40 to
lubricate the poles to help
them slide easier. Wipe
off any excess. Silicone
may be substituted but is
not as effective.