Trap destination – Airlink CDMA/1x User Manual
Page 51
Advertising

Raven CDMA User Guide for Verizon, version 2.23
45
Simple Network Management Protocol (SNMP)
Trap Destination
*SNMPTRAPDEST needs to be set with the destination IP and port. If either are
set to zero or empty, SNMP traps are disabled.
FIGURE 5.
Wireless ACE: *SNMPPORT
Note:
Traps are sent out according to the SNMP security level
(i.e. if the security level is 2, traps will be authenticated and
encrypted). Currently, the only trap supported is LinkUp.
Advertising