Avaya AP201 User Manual
Page 8
Meru Networks WLAN Controllers with AP100, AP201, AP208
Configuration Guide
Field Verified
Page 8
ESSID configuration
The ESSID used by wireless IP telephones in production is of a similar configuration but
would be configured for Virtual Cell and be assigned with the appropriate security profile.
It is important to note that when enabling the multicast support (for the server discovery and
PTT feature) you must ensure that there is only one ESSID per VLAN otherwise multicast
traffic is not passed.
If the deployment utilizes Avaya Call Servers on a software version older than 0.100 and does
not have a Avaya Voice Priority Processor, then all 802.11 base rates higher than 1.2 Mbps
must be disabled for the wireless IP telephone ESSID. If your deployment utilizes a Avaya
Voice Priority Processor or is running version 0.100 or higher on the Avaya Call Server then
1,2,5.5, or 11 Mbps may be utilized as base and supported rates.
essid svp
security-profile chosen_security_profile
vlan svp_vlan (if required)
multicast-enable
ap-discovery join-ess
no ap-discovery join-virtual-ap
beacon dtim-period 2
beacon period 100
no publish-essid
exit