Poly-Tex FB3025-4 - Manual (Page 3)

1. ATTACH STABILIZER TO
THREADED STUDS ON
BENCH ENDS USING NYLON
WASHERS AND WING NUTS.
2. SET BENCH TOPS IN PLACE.
3. SECURE UPPER BENCH
TOPS WITH STACKER CLIPS.
SEE FIGURE 1
4. SECURE LOWER BENCH
TOPS WITH NORSTAD
CLIPS. SEE FIGURE 2
BENCH TOP
NORSTAD CLIP THUMB SCREW
NORSTAD
CLIP
STACKER
CLIP
FIGURE 2
FIGURE 1
STACKER CLIP
THUMB SCREW
BENCH TOP
STABILIZER
BENCH END
FLAT MATE - 4'
USE CAUTION
DURING ASSEMBLY
PINCH HAZARD
USE CAUTION
DURING ASSEMBLY
PINCH HAZARD