Poly-Tex FB3006 - Manual (Page 3)

INSTRUCTIONS:
1. ATTACH STABILIZER TO BENCH ENDS USING
NYLON WASHERS & WING NUTS.
2. PLACE BENCH TOPS ON BENCH ENDS.
3. INSTALL NORSTAD CLIPS PER FIGURE 1 BELOW.
THUMB SCREW
BENCH TOP
NORSTAD CLIP
BENCH END
BENCH SUPPORT
NORSTAD CLIP
W/THUMB SCREW
(BOTH ENDS)
BENCH END
BENCH TOP
BENCH END
BENCH END
STABILIZER
3/8" NYLON
WASHER
3/8" WING NUT
FIGURE 1