Poly-Tex FB3032 - Manual (Page 3)

1. ATTACH STABILIZER TO BENCH
ENDS USING NYLON WASHERS
AND WING NUTS.
2. SET BENCH TOPS ON BENCH ENDS.
SECURE USING BENCH CLIPS AND
THUMB SCREWS AS SHOWN IN
FIGURE 1 BELOW.
STABILIZER
BENCH END
BENCH END
BENCH TOP
BENCH END
CROSS TUBE
3/4" BENCH CLIP
THUMB SCREW
FIGURE 1
BENCH TOP
3/4" BENCH CLIP
USE CAUTION
DURING ASSEMBLY
PINCH HAZARD