Guide & roll up assembly, Figure 1 figure 2 figure 3 figure 4 – Poly-Tex KOOL MART with Roll-up sides User Manual
Page 17
GUIDE & ROLL UP ASSEMBLY
REV: AD-130315
KOOL MART WITH ROLL-UP SIDES
Insert KM2042 into the corner base until the snap button locks.
Repeat for the other end using KM2041. FIGURE 1
After installing the poly curtain and the gearbox guides attach the
KM2040 roll up curtain guides on every hoop frame. Slide guides
onto the guide brackets on the base FIGURE 2 , then onto the
stud. FIGURE 3 Secure to frame using wing nuts & nylon washers.
Repeat for the side of the structure not shown.
Attach the gearbox extension to the gearbox using the bolt
provided FIGURE 4 . Slide the gearbox onto the gearbox guide
and attach to roll up tube with snap button as shown in FIGURE 1 .
Repeat at opposite side of structure that is not shown.
GEARBOX
EXTENSION
WING NUT &
NYLON WASHER
SNAP BUTTON
KM2042
GUIDE BRACKET
KM2040
FIGURE 1
FIGURE 2
FIGURE 3
FIGURE 4
KM2040