Qualcraft ULTRA-Jack Work Bench - Manual

OPTIONS • ULTRA-JACK
SYSTEM
ULTRA JACK OPTIONS AND ACCESSORIES
MODELS #2002, @2004, #2008, #2009, #2006, #2012, #2024, #2013
Ultra-Jack System
Model # 2000
Ultra-Jack System
Workbench
Model # 2004
Ultra-Jack Aluminum
& Rubber Pole
The reinforced structural
grade aluminum/ rubber pole
has field replaceable facing.
Continuous metal reinforcing
virtually eliminates rubber
distortion.
6 foot pole Model # 2006
12 foot pole Model # 2012
24 foot pole Model # 2024
6 foot Aluminum Pole Connector
Model # 2013
Uses spring loaded pins
made of stainless steel
The use of workbenches
promotes efficiency and
productivity, and this ver-
satile unit can be installed
at any time during the job
without removing the jacks
from the poles.
Ultra-Jack System
Brace
Model # 2009
Provides rigid, triangular
bracing as required by OSHA,
with full swivel head to ac-
commodate all roof pitches.
Ultra-Jack
Pole Anchor
Model # 2008
Ultra-Jack Pole
Base Model
Model # 2009
These unique self-locking
bases and anchors are
interchangeable, and provide
added stability and security
for use on all ground work
surfaces.
The Ultra-Jack System is unique,
safe, durable and a dream to operate!
This versatile, state-of-the-art system
is perfect for the contractor who
wants to promote worker speed and
efficiency while providing the safest
scaffolding available. The Ultra-Jack
System is ultra safe, easily transport-
ed, easy to set up and take down, and
has a greater climbing rate per stroke
for faster movement and less worker
fatigue. The easily adjusted work plat-
form can be raised or lowered to the
perfect height, eliminating overreach-
ing and uncomfortable positions. The
pump jack mechanism uses a spring-
loaded cam lock for smooth opera-
tion, and there’s no clutch to wear
out. Also included are wall braces
(model #2002) with a swivel head to
accommodate all roof pitches, and
interchangeable pole anchors and
bases to accommodate all ground
surfaces. The System can be fitted
with guardrails and a workbench that
can be installed at any time during the
job without removing the jacks from
the poles. For extra comfort, the foot
levers and hand cranks are padded,
and the toe straps are big enough to
accommodate large work boots.
Customer Support and Ordering Information
781-344-1000 • www.qualcraft.com
© Copyright 2003 • Qual-Craft ® Industries • 1551