Ramsey Winch REP-8000 24V MOTOR REPLACEMENT 251277 - Manual (Page 4)

ITEM NO. QUANTITY PART NO. DESCRIPTION
1 1 296591 REPLACEMENT MOTOR END BEARING ASSEMBLY, 24V
2 1 289115 MOTOR LEAD WIRE ASSEMBLY #6 GA 17” LONG
3 1 289208 SOLENOID GROUND WIRE ASSEMBLY #18 GA 12.5” LONG
4 1 412056 DRUM BUSHING
5 1 414370 BOLT 3/8-24NF X 1/2” LG HX HD GR5 Z/P
6 2 414823 CAPSCREW 1/4-20UNC X 3/4” LG HX SOC BUTTON HD
7 1 418177 LOCKWASHER 3/8 MED Z/P
8 2 482020 BOOT #6 GA
MOTOR REPLACEMNET KIT PARTS LIST
4
15. Connect motor leads to terminals on side of motor end bearing assembly as shown below:
16. Tighten nuts on terminals and slip boots over studs.
After you complete replacement of the motor, connect the battery leads to a battery and confirm that the winch oper-
ates in the IN and OUT directions.
Motor
Lead
“A”
Motor
Lead
“1”
Motor
Lead
“2”