Ramsey Winch 60K WILDCAT WINCH User Manual
Page 20
19 OM-914214-0609-D
DISASSEMBLY OF OUTPUT CARRIER
Carrier assemblies may be purchased as a complete assembly (see pg. 23) or parts may be
purchased individually (see below). If purchasing individual parts, it will be necessary to
disassemble the gear carrier as outlined below.
1. Carefully drive roll pin #305 into carrier pin #304 so that it is captured within carrier pin #304
but not touching the opposite side of the output carrier #301.
2. Tap carrier pin #304 to remove it from the output carrier #301.
3. Place a plastic pail in a position to catch bearings #306, spacer #307 and thrust washers #303,
then slide the gear #302 from the carrier #301.
4. Remove the roll pin #305 from the carrier pin #304.
5. Repeat this process for the two remaining gears in the carrier.
ITEM #
QTY
PART #
DESCRIPTION
301 1
317021
OUTPUT CARRIER
302 3
334218
PLANET GEAR
303 6
518074
THRUST WASHER
304 3
470126
CARRIER PIN
305 3
470036
ROLL PIN 1/4 DIA X 1 1/4 LG
306 204
402136
BEARING-NEEDLE ROLLER
307 3
362315 SPACER
OUTPUT CARRIER
301
303
306
304
302
307
306
303
305