Ramsey Winch H-800 DOW-LOK W/25000 LB RATING User Manual
Page 17
(21)
Attach mounting angles (item #2) to
winch assembly. Use capscrews
(item #47 & #48) and lockwashers
(item #55). Tighten capscrews to
290 ft. lb. (393 Nm) each. Insert
plug (item #63) into hole in bottom
of gear housing. Remove plugs
(items #59 & 62) from top of hous-
ing. Pour 3 -3/4 pints of E.P. 140 oil
into hole and replace plugs.
Check the action of the clutch by
shifting and freespooling the winch
drum several times.
The shift pattern plate on top of the clutch housing is adjusted at the factory to provide reli-
able shifting of the Dow-Lok® clutch. If the plate should loosen or be removed, you must
readjust the plate. Shift the handle to disengage the clutch and hold against the internal stop.
With the latching pin in the "OUT" slots, push the shift pattern plate toward the cable drum.
Unsnap plastic lever cover from pattern plate. Tighten the four capscrews which hold the
plate to housing. Snap lever cover back into place around the pattern plate.
17