Ramsey Winch HDP35000 - Plantetary Industrial Winch - Manual (Page 3)

Weight (without cable)...............................................................504 lb. (226 Kgs.)
Rated Line Pull (lbs.)...................................................................................35,000
12,970
8.65
28,600
Gear Reduction..........................................................................................33.16:1
11.9 cu.in./Rev. motor.
* These specifications are based on recommended wire rope .75" dia. EIPS and
(Kgs.)......................................................................................15,909
1 2 LAYER OF CABLE
*Line speed
*Cable capacity
(at 25 GPM)
per layer
*Rated line pull
FPM
Kg.
Lbs.
MPM
M.
Ft.
7 19
7.02
23.2 28.4
15,870
35,000
25 65
3 4 5
9,520
47
38.7
21,000
155
11.79
32
33.6
10.24
10,970
24,200
105
64
43.9
13.38
8,390
18,500
210
RAMSEY HYDRAULIC PLANETARY WINCH MODEL HD-P35,000
PLEASE READ THIS MANUAL CAREFULLY
This manual contains useful ideas in obtaining the most effi cient operation from your Ramsey
Winch, and safety procedures one needs to know before operating a Ramsey Winch. Do not
operate this winch until you have carefully read and understand the “WARNINGS” and “OP-
ERATION” sections of this manual.
WARRANTY INFORMATION
Ramsey Winches are designed and built to exacting specifi cations. Great care and skill go into
every winch we make. If the need should arise, warranty procedure is outlined on the back of your
self-addressed postage paid warranty card. Please read and fi ll out the enclosed warranty card
and send it to Ramsey Winch Company. If you have any problems with our winch, please follow
instructions for prompt service on all warranty claims. Refer to back page for limited warranty.
SPECIFICATIONS* (LOW SPEED MODE) STANDARD DRUM
NOTE: The rated line pulls shown are for the winch only. Consult the wire rope manufacturer
for wire rope ratings.
1