Ramsey Winch HD-P 177,9 - Manual (Page 8)

5
INSTRUCTIONS FOR OVERHAUL
2. Disconnect tube #40 from elbow #43 on valve #41 and fitting #29 on brake #30b. Remove motor #33 and gasket
#30a by removing (2) capscrews #22. Remove valve #41, if needed, from motor by loosening (4) capscrews #16.
DIS-ASSEMBLY
1. Drain oil from gear housing cover by removing pipe plug #37 and relief fitting #32. Remove tensioner assembly .
37
32
30a
33
41
40
16
22
43