Ramsey Winch CHEVY GRILL GUARD KIT 295921 - Manual (Page 6)

5
Step 6
Note: You will need assistance for this step.
Have someone hold the center unit while you insert the winch-
mounting channel #2 between side plates of center unit #3.
Channel shims #22 are inserted between the end of the channel
and the side plate of the center unit on both sides. Secure each
side of channel using (2) 3/8-16NC x 1-1/4 capscrews #14 with
nuts #17 (Figure 15).
Step 7
Mount center unit on vehicle and secure each side at the lower support bracket using (3) 1/2” X 1-1/4”
capscrews #15 with (3) 1/2” nuts #18 (Figure 16). Attach each side of center unit to upper support
bracket using (1) 3/8-16NC x 1-1/4 capscrew #14 with nut #17 (Figure 17). Tighten all hardware to
proper torque. (See torque value chart, page 6).
Step 8
Install fairlead as shown below. Note that top holes in channel (Figure 18) align with bottom holes on
roller fairlead (Figure 19). Secure using capscrew, lockwasher, and nut furnished with winch.
Figure 18
Figure 19
FURNISHED WITH WINCH FURNISHED WITH WINCH
Figure 15
Figure 16 Figure 17