Ramsey Winch CHEVY WRAPAROUND KIT 295932 - Manual (Page 4)

3
Figure 13 Figure 12
Step 5
Slide lower L.H. mounting bracket #10 between tow hook and frame mounting bracket #7 (Figure
12). Position lower mounting shim #33 between the two brackets and secure using (2) 1/2-13NC X
1-1/4" capscrews #19 and (2) 1/2" nuts #22 (Figure 13).
DO NOT TIGHTEN HARDWARE COMPLETELY.
Step 6
Note: You will need assistance for this step.
Have someone hold the center unit while you insert the winch
mounting channel #2 between side plates of center unit #5.
Channel shims #29 are inserted between the end of the channel
and the side plate of the center unit on both sides. Secure each
side of channel using (2) 3/8-16NC x 1-1/4 capscrews #18 with
nuts #21 (Figure 14). Note: Do not tighten hardware at this
location, as you will need to remove these nuts to install the
wraparound in a later step.
Note: For 2003-2004 GMC Sierra, it is necessary to insert the
provided 1/4" spacer #13 onto the 3/8" capscrews #18 as shown in
Figure 15, between the upper mounting bracket #11 and the winch
channel #2.
Figure 14
Figure 15