Ramsey Winch DODGE GRILL GUARD KIT 295371 (PAT 12/15) - Manual (Page 5)

7. Lift winch and side plate assembly into place on the right
and left mounting arms (items #6 and #7). Install the side
plates (item #2) into the mounting arms using (3) 1/2-
13NC x 1-3/4” long capscrews (item #11), nuts (item
#14), and lockwashers (item #17).
Do not tighten until told to do so.
8. Install the grille (item #4) tubes to the right and left hand
side plates as shown at right. Use (2) 3/8-16NC cap-
screws (item #9) and shims (item #18) for each tube.
Do not tighten until told to do so.
9. If needed, install the license tag bracket (item #1) to the
underside of the winch channel as shown at right using (2)
1/4-20NC button head screws. Tighten to 5 ft-lbs (7 Nm)
torque.
Install the license plate to the brackets using (2) 1/4-20NC
hex head capscrews (item 8) and flatwashers (item #16).
5