Ramsey Winch FORD WRAPAROUND KIT 295346 - Manual (Page 5)

STEP 2
4
Place channel (item #3) between R.H. and L.H. bracket assemblies (item #5 & #6). Secure side
plates (item #1) to outside of lower R.H. & L.H. brackets (item #5 & #6) and ends of channel. Use (2)
3/8-16NC x 1-1/4 lg. carriage bolts with lockwashers and nuts (each side).
Attach lower end of side plates (item #1) to outside of R.H. & L.H. brackets (item #5 & #6) use (1)
3/8-16NC x 1 lg. hx.hd. capscrew with lockwasher and nut (each side).
DO NOT TIGHTEN HARDWARE.
Attach tube assembly (item #4) between side plates, with shims (item #20), as shown, using 3/8-
16NC x 3/4 lg. hx.hd. capscrews. Squarely align kit with front of vehicle. Attach light tube assemblies
(item #7) to side plates, as shown. Use (2) 3/8-16NC x 3/4 carriage bolts with lockwashers and nuts,
each side. NOTE: On chrome kit 295347, use plated hardware at this location.
TIGHTEN ALL HARDWARE TO PROPER TORQUE VALUE (See Torque Value Chart, page 7).