Step 1 – Ramsey Winch HUMMER H1 KIT 295376 User Manual

Page 2

Advertising
background image

STEP 1

Remove vehicle bumper by removing vehicle mounting hardware used to secure tie down brackets to vehicle bumper
body mounts.

Place 2x4 wooden block spacers on top of vehicle R.H. and L.H. frame to support vehicle grille. Remove vehicle
hardware from R.H. and L.H. frame and body mounts.

Use pry bar to bend R.H. and L.H. vehicle frame brace about 1/2” away from vehicle frame.

2

Advertising
See also other documents in the category Ramsey Winch For the car: