Ramsey Winch FORD WRAPAROUND KIT 295918 - Manual (Page 5)

KI-913348-0301-B 4
Step
6
Repeat steps 3-5 for R.H. side of vehicle frame. It may be
necessary to trim or file away a small portion of the fiberglass
(Figure 12). This will prevent the frame mounting brackets from
rubbing. TIGHTEN ALL HARDWARE TO PROPER TORQUE
VALUE (See Torque Value Chart, page 9).
Step 7
Place angle #8 on top of L.H. frame and against bracket assembly. Use holes in bracket
assembly as a guide to centerpunch and drill (2) 7/16 dia. holes in angle. Secure angle to
bracket using (2) 3/8-16NC x 1-1/4 lg. capscrews #13 with locknuts #18. Repeat for R.H. side.
TIGHTEN ALL HARDWARE TO PROPER TORQUE VALUE (See Torque Value Chart, page 9).
Step 8
Reinstall vehicle bumper.
Trim here if needed for clearance
Figure 12
Figure 13 Figure 14