Ramsey Winch DODGE WRAPAROUND KIT 295252 - Manual (Page 4)

KI-913275-0999-G 3
STEP 2
2. Thread (1) 3/8-16NC x 1-1/2 capscrew #14 through lock nut #21 and through nut welded to bottom of
bracket #3.
3. If vehicle is not equipped with tow hooks, this kit requires spacer plate #31 to be used.
4. Mount R.H. bracket #3 as shown, adding spacer plate #31 (if required). Using (1) 7/16-14NC x 1-1/2 lg.
hx. hd. capscrew #16, insert through front hole of bracket, then through spacer plate #31 (if required) or
tow hook and then through bumper mounting bracket and frame. Attach with flatwasher #28, lockwasher
#27 and nut #22 as shown. DO NOT TIGHTEN.
5. For the middle hole, insert (1) 7/16-14NC x 1-1/2 lg. hx hd capscrew #16, insert through bracket #3, then
through spacer plate #31 (if required) or tow hook and then through bumper mounting bracket and
frame. Attach with flatwasher #28, lockwasher #27 and nut #22 as shown. DO NOT TIGHTEN.