Ramsey Winch FORD GRILL GUARD KIT 295917 - Manual (Page 5)

KI-913347-0301-B 4
Step
6
Repeat steps 3-5 for R.H. side of vehicle frame. It may
be necessary to trim or file away a small portion of the
fiberglass (Figure 12). This will prevent the frame
mounting brackets from rubbing. TIGHTEN ALL
HARDWARE TO PROPER TORQUE VALUE (See
Torque Value Chart, page 9).
Step 7
Place angle #6 on top of L.H. frame and against bracket assembly. Use holes in bracket
assembly as a guide to centerpunch and drill (2) 7/16 dia. holes in angle. Secure angle to
bracket using (2) 3/8-16NC x 1-1/4 lg. capscrews #10 with locknuts #14. Repeat for R.H. side.
TIGHTEN ALL HARDWARE TO PROPER TORQUE VALUE (See Torque Value Chart, page 9).
Step 8
Reinstall vehicle bumper.
Trim here if needed for clearance
Figure 12
Figure 13
Figure 14