Ramsey Winch FORD QM KIT 251071 - Manual (Page 4)

1. Slide the tow hooks through the tow
hook access in the air dam.
2. Position slot in tow hook over the
rear 12mm bolt and slide forward.
3. Install new front tow hook bolt
(12mm x 1.75). Secure with 1/2”
lockwasher and 1/2” flat washer.
Tighten all bolts securely. (See torque
value chart on page 3).
4. Repeat for other side.
Reinstalling the Tow Hooks
3
1. Using existing access space in air
dam, slide the receiver tube through
the air dam from the front. Align holes
in receiver tube with holes in frame
mounting bracket.
Note: On some vehicles, it may be
necessary to slightly notch the
bottom edge of the license tag
holder.
2. Secure back plate using (2) 3/8” X
1” capscrews, with 3/8” lockwasher
and nut each side. Tighten securely.
(See torque value chart on page 4).
3. Secure top plate using (2) 3/8” X
1” capscrews, with 3/8” lockwasher
and nut each side. Tighten securely.
(See torque value chart on page 4).
4. Refer to winch owner’s manual for
mounting instructions.
Install Receiver Tube