Ramsey Winch RPH 8000T - Manual (Page 5)

4
HYDRAULIC SYSTEM REQUIREMENTS
Refer to the performance charts below to properly match your hydraulic system to the winch performance. The
charts consist of: (1) line pull (LB) first layer vs. working pressure (PSI), and (2) line speed, first layer (FPM) vs. flow
(GPM). A cylinder spool directional control valve is recommended.
*CAUTION: DO NOT EXCEED 20 GPM. IF EXCEEDED, MOTOR AND WINCH MAY BE DAMAGED.
PERFORMANCE
CHARTS*
SYSTEM REQUIREMENTS:
2500 PSI RELIEF VALVE SETTING
15 GPM FLOW RATE*
10 MICRON NORMAL FILTRATION
1000 PSI MAXIMUM BACK PRESSURE
EMERGENCY STOP VALVE
Installer must determine type of emergency
stop required. A manual control valve also
serves as an emergency stop valve. An
emergency stop valve may be required with
other types of control valves.