Ramsey Winch RPH-30000 for Boniface - Manual (Page 13)

12. Align key way of coupling with key on end of input shaft inside end bearing assembly. Slide coupling over end of
shaft. Place gasket (item #38e) into position on motor mounting surface of end bearing (item #10). Use (2)
screws (item #23) to attach adapter plate (item #38d) to motor end bearing. Torque capscrews to 85 ft-lbs.
each. Place second gasket (item #38e) on adapter plate. Insert brake shaft with key (item #38c) into coupling.
Re-attach brake (item #38a) to adapter plate using brake assembly screws (item #18). Torque capscrews to 97
ft-lbs. each.
Note: Care must be taken to assure brake assembly and adapter plate are seated properly prior to installing
assembly bolts (item #18). Damage will occur to rotor stack or shaft snap ring if not properly installed.
18
18
36
38a
23
23
38c
38e
38d
38e
8
10