Ramsey Winch RPH-50,000 (AATAC) - Manual (Page 8)

6
3. Remove brake assembly screws (item #16) from brake (item #34a) to access (2) mounting screws (item #18) at-
taching brake adapter plate (item #34d) to end bearing (item #7). CAUTION: Brake is spring loaded by clutch
spring and must be restrained against end bearing as mounting screws (item #18) are removed. Remove
coupling (item #5) and gasket (item #34e) from end bearing. Take note of mounting configuration for proper mount-
ing of parts during re-assembly.
4. Remove winch from tiebars (items #2) by removing (8) capscrews (item #17), (8) lockwashers (item #23) and (4)
shoulder bolts (item #28). Pull motor end bearing (item #7) from drum assembly (item #1).
7
5
16
34c
18
16
32
34a
34e
34d
34e
18
28
8
1
7
2
2
23
23
28
17
17
OUTER-MOST
CAPSCREW
INNER-MOST
CAPSCREWS
OUTER-MOST
CAPSCREW
23 17
28
28