Rapid-Air STRAIGHTENER: SC SERIES - Manual (Page 9)


Three different loop sensing
arm operating positions are
selected manually during set-up.
by selecting the higher number,
the zero point of the dancer arm
is raised from its rest position to
the angle shown (as indicated
0-2). The dancer arm will move
from rest position to the angle
selected before the straightener
rolls begin to rotate.
dancer arm loop
Dancer Arm Loop height Adjustment
30 degree—loop sensing arm travels through a full 30 degree arc to vary
rotation speed from slow to full speed as controlled by % speed pot.
20 degree—loop sensing arm travel through a 20 degree arc to vary
speed from slow to full speed as controlled by % speed pot.
10 degree— loop sensing arm travels through a 10 degree arc to vary
rotation speed from slow to full speed as controlled by % speed pot.
Dancer Arm Loop range Function
3
2
1