Rapid-Air CABINET REEL - Manual (Page 5)

DANCER ARM LOOP HEIGHT ADJUSTMENT
Three different loop sensing arm operating positions are selected
manually during set-up. By selecting the higher number, the zero
point of the dancer arm is raised from it’s rest position to the angle
shown (as indicated 0-2). The dancer arm will move from rest posi-
tion to the angle selected before the pallet reel begins to rotate.
DANCER ARM LOOP RANGE FUNCTION
30 degree— Loop sensing arm travels through a full 30 degree arc to
vary turntable rotation speed from slow to full speed as controlled by
% speed pot.
20 degree— Loop sensing arm travels through a 20 degree arc to
vary turntable speed from slow to full speed as controlled by % speed
pot.
10 degree— Loop sensing arm travels through a 10 degree arc to
vary turntable rotation speed from slow to full speed as controlled by
% speed pot.
5