Reelcraft Series B5005 Spring Driven Reels - Manual

1. Do not use reel at higher pressures or temperatures than
listed on the back of this bulletin.
2. Remove all spring tension before beginning dissassembly
process.
SAFETY
INSTALLATION: A flexible hose connection must be used between the hose reel inlet and the source of supply to prevent possible
misalignment and binding.
LUBRICATION: Hose reel spring and bearings are factory lubricated and require no further lubrication.
REPLACING HOSE: 1. Wind spool flange clockwise-facing swivel-until spring is tight.
2. Back off three turns and latch.
3. Insert hose through roller guide.
4. Connect hose fitting to swivel joint and secure hose with clamps.
ADJUSTMENTS: To adjust spring tension, add or remove wraps of hose from the spool, one wrap at a time until desired tension is
obtained.
REPAIRS: Extensive repairs should be performed only by an authorized serviceman or factory to avoid damage which may
void your warranty. Remove all spring tension before beginning disassembly process.
*Refer to chart on page 2 for size index numbers.
Operating Instructions
Series B4000 / B5000 / B5005
Spring Driven Reels
Low, Medium and High Pressure Model Numbers:
Reelcraft Industries, Inc. • 2842 E Business Hwy 30, Columbia City, IN 46725
Ph: 800-444-3134 / 260-248-8188 • Fax: 800-444-4587 / 260-248-2605
Customer Service: 855-634-9109 • [email protected] • www.reelcraft.com
Form# 1236-1122 Rev: 4/2013
MOUNTING: The hose reel is equipped with a universal mounting bracket so that it can be mounted on the floor, wall or
ceiling; whichever place is convenient. The hose guide arm can be moved to the position desired by removing
the screws fastening the guide bracket to the reel base. Shift the guide arm bracket so the hose comes off the
reel at the desired position and replace the screws.
Dimensions - Size Index
1 2 3
A 12 7/8” 14 3/8” 17 5/8”
B 12 3/8” 14” 16 1/2”
C 8” 9 3/4” 9 3/4”
D 2 1/2” 2 1/2” 2 1/2”
E 5 5/8” 6 1/8” 5 7/8”
B4425 OLP B5450 OLP B4625 OLP B5650 OLP
B5825 OLP B5850 OLP B5435 OMP B5630 OMP
B5835 OMP B5435 OHP B5625 OHP