ALESIS QS6.2 User Manual

Page 92

Advertising
background image

A

Frequently Asked Questions

90

the MIDI portion of this manual and consult the Sound Bridge online

manual on how to burn a sequence into your card. Once you do this,

you can play sequences by pressing the [SEQ SELECT] button and

selecting a sequence number.

How do I load samples into the QS?

To load samples, you will need a Flash card plugged in the QS’s PCMCIA

Expansion Slot, a computer with a MIDI port, and Sound Bridge

software (available free on the Alesis Website). Connect your computer’s

MIDI port to the QS as described in the MIDI portion of this manual

and consult the Sound Bridge online manual on how to burn samples

into your card.

Where can I get Q Cards?

You can find Q Cards at your local Alesis dealer (where you purchased

your QS, for example). In addition, they are available from several

nationwide mail-order and internet music equipment dealers.

Where can I get SRAM cards and Flash cards?

SRAM and Flash cards are available from computer stores, mail-order

houses, and on the Internet. Check the Alesis website for more

information.

Where can I get more Banks?

Additional Program/Mix Banks are available on the Alesis website free

of charge.

Are QS6.2/QS8.2 Programs compatible with

older QS programs?

Absolutely! You can use QS7, QS8, QS6.1, QS7.1, and QS8.1 programs

in your QS6.2 or QS8.2.

How do I change what the sliders do?

To change what the sliders do for a particular Program, go into Edit

mode by pressing the [EDIT] button. Select one of the active sounds by

pressing one of the [00] – [04] buttons. Next, find which Mod route is

currently assigned to the slider by pressing the [0] – [5] buttons. Once

you have found the slider (for example, [CNTRL A]), use the [PAGE]

buttons to get to the destination and level pages. There, you can modify

what the slider is modulating and how much. If you can’t find the slider,

then it’s not modulating anything in that Sound. In this case, you can re-

assign one of the Mod routes to the slider.

Where can I get more information on the QS?

There are QS users groups on the Internet with more information. In

addition, you can check out the Hal-Leonard book, “Alesis QS Made

Easy” by David Crawford.

Advertising
This manual is related to the following products: