SaltDogg WB200B v.2 - Manual (Page 4)

4
TM
4
18
13
14
M6x45
17
18
1
DRIVE GEAR
MOUNTING HOLE
DRIVE WHEEL
MOUNTING HOLE
COTTER
PIN
SHIM
WASHERS
COTTER PIN
MOUNTING HOLE
2. Loosely assemble the axle components to the
Frame(1).
A. Position the Spinner Shaft Support(17) and orient it
as shown.
B. Add two Shim Washers as shown.
C. Add four plastic axle Bushings (18).
3. Position the Spinner Assembly(4) into the Spinner
Shaft Support(17) and assemble the parts so that the
small gear fits into the Drive Gear(14). Using a Cotter
Pin, secure the Shim Washer against the Spinner Shaft
Support as shown.
4. Loosely mount the spinner shaft mounting plate to
the Frame using the two m6x40 bolts that have larger,
flat washers pre-mounted.