Val-Matic 49A Wastewater Air Release Valve - Manual (Page 6)

5
REASSEMBLY (Cont'd)
7. Lay new cover gasket on clean surface.
Assemble gasket (6) and cover (2) over bolt
holes in body (1).
8. Insert lubricated bolts (7) and tighten to the
torques listed in Table 2.
9. Place valve back in service. Refer to the
Installation instructions on page 2. Slowly open
inlet isolation valve.
Model Number Bolt Size Torque (ft-lbs)
48A, 48A.2
48A.4, 48A.5
7/16” 30
49A, 49A.2
49A.4, 49A.5
1/2” 45
TABLE 2. VALVE COVER BOLT TORQUES
PARTS AND SERVICE
Parts and service are available from your local
representative or the factory. Make note of the valve
Size and Model No. located on the valve nameplate
and contact:
Val-Matic Valve and Mfg. Corp.
905 Riverside Drive
Elmhurst, IL 60126
PH: 630 / 941-7600
FAX: 630 / 941-8042
A sales representative will quote prices for parts or
arrange for service as needed.
VALVE AND MANUFACTURING CORP.
905 Riverside Dr. ● Elmhurst, IL 60126
Phone (630) 941-7600 ● Fax (630) 941-8042
www.valmatic.com
LIMITED WARRANTY
All products are warranted to be free of defects in material and workmanship for a period of one year from the date of
shipment, subject to the limitations below.
If the purchaser believes a product is defective, the purchaser shall: (a) Notify the manufacturer, state the alleged defect
and request permission to return the product; (b) if permission is given, return the product with transportation prepaid. If
the product is accepted for return and found to be defective, the manufacturer will, at his discretion, either repair or replace
the product, f.o.b. factory, within 60 days of receipt, or refund the purchase price. Other than to repair, replace or refund
as described above, purchaser agrees that manufacturer shall not be liable for any loss, costs, expenses or damages of
any kind arising out of the product, its use, installation or replacement, labeling, instructions, information or technical data
of any kind, description of product use, sample or model, warnings or lack of any of the foregoing. NO OTHER
WARRANTIES, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF FITNESS FOR A
PARTICULAR PURPOSE AND MERCHANTABILITY, ARE MADE OR AUTHORIZED. NO AFFIRMATION OF FACT,
PROMISE, DESCRIPTION OF PRODUCT OF USE OR SAMPLE OR MODEL SHALL CREATE ANY WARRANTY FROM
MANUFACTURER, UNLESS SIGNED BY THE PRESIDENT OF THE MANUFACTURER. These products are not
manufactured, sold or intended for personal, family or household purposes.