American Audio MCD-810 - Manual (Page 25)

T AP
B O P
S G L
C T N TIME
M 2 3 4 1
T A P
B O P
S G L
C TN T IME
M 2 3 4 1
FOLDER TRACK
M
TOTALREMAIN
S F
PITCH
AUTO BPM
CD MP3
CUE
RELOOP
SINGLE
AUTO CUE FOLDER TRACK
M
TOTALREMAIN
S F
PITCH
AUTOBPM
CD MP3
CUE
RELOOP
SINGLE
AUTO CUE
PITCH ADJUSTMENTS
© American Audio ® - www.americanaudio.us - MCD-810™ Instruction Manual Page 25
Figure 35
4. JOG WHEEL (1):
The JOG WHEEL will temporarily bend the pitch if a track is in playback mode Rotating the wheel in a clock-
wise direction will increase your track pitch and rotating the wheel in a counter-clockwise direction will slow
your track pitch. The speed you rotate the JOG WHEEL will determine pitch bend percentage (%). For example,
if the JOG WHEEL is continuously turned in a counter-clockwise direction the playback speed will steadily
decreases and will continue to decrease until playback reaches a maximum of -100% and playback stops
entirely. When you stop turning the JOG WHEEL the disc speed will automati
c
ally return to it’s previous set
speed.
NOTE: You cannot use the JOG WHEEL as a pitch bend function when the SCRATCH EFFECT (5) is
activated.
3. PITCH BEND BUTTONS (15):
The (+) PITCH BEND BUTTON (15) will increase track playback speed and the (-) PITCH BEND BUTTON (15)
will decrease track playback speed. The extent to which the speed changes is proportionate to the amount
of time the button is pressed. For example, if the (+) PITCH BEND BUTTON (15) is held down continuously as
in figure 43, the disc speed will increases and will continue to increase until it reaches a maximum of 100%
speed gain. When you release the (+) PITCH BEND BUTTON (15)
the disc speed will automati
c
ally return to
it’s previous set speed.