Ross Controls CATEGORY 4 - Manual

95 www.rosscontrols.com
IMPORTANT NOTE: Please read carefully and thoroughly all of the CAUTIONS, WARNINGS on the inside back cover.
These systems are not designed for controlling clutch/brake mechanisms on mechanical power presses.
• Pre-engineered panel-mounted design with air entry via a filter and regulator “FR”, or filter, regulator and lubricator “FRL”
• Includes DM 2® Series E Double Valve with Monitoring & Memory:
a) Self-contained dynamic monitoring system requires no further valve monitoring controls,
b) Dynamic memory of abnormal function prevents unintentional reset with removal of air or electricity.
• All necessary features for safety applications are included:
a) Electrical reset valve,
b) Status indicator switch for valve condition (ready-to-run) feedback.
• Pre-engineered panel-mounted design with air entry via a filter and regulator “FR”, or filter, regulator and lubricator “FRL”
• Includes DM 1 Series E Double Valve with Monitoring:
a) Self-contained dynamic monitoring system requires no further valve monitoring controls,
b) Ready-to-run: If an abnormality clears itself upon the removal of electricity to both solenoids, it will be ready-to-run again.
It does not remember the abnormality & stay in a locked-out state until intentionally reset.
Therefore, cumulative abnormalities may go undetected,
c) Status indicator switch for valve condition (ready-to-run) feedback.
Category 4 with Modular L-O-X ® and DM 2® Series E
Category 3 with Modular L-O-X ® and DM 1 Series E
electricity.
Pressure Switch
not shown
• Pre-engineered panel-mounted design with air entry via a filter and regulator “FR”, or filter, regulator and lubricator “FRL”
• Includes DM 2® Series C Double Valve with Monitoring & Memory:
a) Self-contained dynamic monitoring system requires no further valve monitoring controls,
b) Dynamic memory of abnormal function prevents unintentional reset with removal of air or electricity
• All necessary features for safety applications are included:
a) Electrical reset valve,
b) Status indicator switch for valve condition (ready to run) feedback
Category 4 with Manual L-O-X ® and DM 2® Series C
4
3
4
* NPT pressure port threads.
Note: Specify voltage when ordering.
** Insert voltage code: “W” = 24 volts DC; “Z” = 110-120 volts AC, 50/60 Hz; e.g., RC404-09W, RC404-09Z.
M12 connectors available, consult ROSS.
Model Air Entry Port Size Avg. C
V
Dimensions (inches/mm)
Number* Type 1,2 3 1-2 2-3 Length Width Depth
RC408-06** FR 1/2 1/2 3 10 24.0 (610) 14.5 (369) 7.4 (187)
RC412-06** FR 3/4 3/4 4.4 13 24.0 (610) 15.7 (399) 8.3 (211)
RC416-06** FR 1 1 4.4 13 27.0 (686) 19.0 (483) 9.0 (229)
RC408L-06** FRL 1/2 1/2 3 10 24.0 (610) 14.5 (369) 7.4 (187)
RC412L-06** FRL 3/4 3/4 4.4 13 24.0 (610) 15.7 (399) 8.3 (211)
RC416L-06** FRL 1 1 4.4 13 31.0 (788) 19.0 (483) 9.0 (229)
• Custom panel options available, consult ROSS
• Explosion proof solenoid pilot available, for more information consult ROSS
Model Air Entry Port Size Avg. C
V
Dimensions (inches/mm)
Number* Type 1,2 3 1-2 2-3 Length Width Depth
RC304-09 ** FR 1/4 1/2 1.3 2.4 13.0 (330) 11.0 (279) 5.4 (135)
RC306-09 ** FR 3/8 1/2 1.9 2.4 13.0 (330) 11.0 (279) 5.4 (135)
RC304L-09 ** FRL 1/4 1/2 1.3 2.4 13.0 (330) 11.0 (279) 5.4 (135)
RC306L-09 ** FRL 3/8 1/2 1.9 2.4 13.0 (330) 11.0 (279) 5.4 (135)
Model Air Entry Port Size Avg. C
V
Dimensions (inches/mm)
Number* Type 1,2 3 1-2 2-3 Length Width Depth
RC404-09** FR 1/4 1/2 1.3 2.4 13.0 (330) 11.68 (297) 5.4 (135)
RC406-09** FR 3/8 1/2 1.9 2.4 13.0 (330) 11.68 (297) 5.4 (135)
RC404L-09** FRL 1/4 1/2 1.3 2.4 13.0 (330) 11.68 (297) 5.4 (135)
RC406L-09** FRL 3/8 1/2 1.9 2.4 13.0 (330) 11.68 (297) 5.4 (135)
Air Entry Packages with
Control Reliable Energy Isolation
Pneumatic Energy
Isolation (LOTO)