Acer ISDN P10 - Manual (Page 9)

Chapter 2
Installation
2.1 Before Installing
Make sure that you have all you need to install the AcerISDN P10
ISDN card. You should have the following:
1. An IBM compatible 486 DX2-66 or above with at least
8MB of RAM.
2. One unused 16-bit expansion ISA bus slot.
3. One free interrupt (IRQ).
4. Microsoft Windows 95 or NT.
5. CR-ROM drive.
6. At least 5MB of free disk space for the AcerISDN P10
controller software.
7. A VGA compatible monitor.
8. An IBM or Microsoft compatible mouse.
9. An ISDN basic rate S
0
interface released by PTT (Post,
Telephone and Telegraph administration).